Lithupa tsa Tungsten Carbide Composite Kapa YD Welding Rods Bakeng sa Lisebelisoa tsa ho cheka

Tlhaloso e Khutšoanyane:

Litlhapi:60-70%Black Silicon Carbide Grits Le 30-40%Ni/Cu

BoleleleBoima: 280/350/450mm

Diameter12/16/22mm

Ho thatafala: 87-90HRA

Boima ba 'mele:250-290g;450-480g

Black Silicon Carbide Grits Boholo:1.6-3.2mm;3.2-4.8mm;4.8-6.4mm;6.4-8mm;8-9.5mm;9.5-12.7mm

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Tlhaloso

Tungsten carbide composite rods/YD welding rodse sebelisoa haholo ho koahela lisebelisoa tse tsofetseng le tse sehang tse sebelisoang ka oli, merafong, merafong ea mashala, jeoloji, kaho le liindasteri tse ling. joalo ka: Reamers,Openers,Lisebelisoa tsa ho tšoasa litlhapi,Casing cutters,Milling tools,Coring tools,Stabilizers,Screw. li-feeders, li-slurry Paddles, ho cheka kaho, ho kopanya lehlabathe la Foundry, Thibelo e akaretsang ea ho abrasive jj.

Ea ronalithupa tse entsoeng ka samente tsa carbidee nka hamore e ka holimo ho senya likaroloana, tse se nang litšila, 'me ho itšeha le ho roala ho molemo ho feta ha likaroloana tse robehileng tse kopantsoeng, tiisa botsitso ba ts'ebetso ea sehlahisoa.

Mokhoa o ikhethileng oa ho hlahloba likaroloana tse robehileng o tiisa hore likaroloana tse robehileng tse hlokehang li na le mahlakore a mangata, eseng a bataletseng.Solder ea boleng bo phahameng, mokhoa oa ho lahla o hōlileng ka ho feletseng, likaroloana tse robehileng tse robehileng tsa lithupa tse kopantsoeng, ts'ebetso e ntle ea phallo, le ho ntlafatsa katleho ea tlhahiso ea bareki.

Tungsten-Carbide-Composite-rods-or-YD-welding-rods-for-Drilling-tools-2

Hamore e ka holimo ea sekhechana

Tungsten-Carbide-Composite-rods-or-YD-welding-rods-for-Drilling-tools-1

Senya Likaroloana

Carbide Composite Rod

Lieta tsa ho Hala

Limaraka tse peli li teng, ebang ke BBW bakeng sa lisebelisoa tsa ho roala kapa BBC bakeng sa ho khaola lisebelisoa.

Boholo ba lijo-thollo	1.6-3.2MM	1/16"- 1/8"BBW
	3.2-4.8MM	1/8"- 3/16"BBW
	4.8-6.4MM	3/16"- 1/4"BBC
	6.4-8.0MM	1/4"- 5/16"BBC
	8.0-9.5MM	5/16"- 3/8"BBC
	9.5-12.7MM	3/8"-1/2"BBC

Lisaese tse ling ka kopo.Likahare tse Tloaelehileng tsa Tungsten Carbide Grit = 65% E fumaneha hape 50%, 60% & 70%, Balance: Matrix(CuZnSn)

E khethiloe ka ho khethehaGrit ea Tungsten Carbideebang ke "blocky" e nang le lithōle tse bohale bakeng sa ts'ebeliso ea ho itšeha kapa "rounded" Tungsten Carbide Grit bakeng sa lisebelisoa tsa ho apara e hlahisoa tlas'a taolo e thata ea boleng.Lisebelisoa li hloekisoa ka botlalo ho netefatsa thepa e ntle ka ho fetisisa ea ho kolobisa, nakong ea ho etsoa le ho sebelisoa.Mekhoa e matla ea taolo ea boleng e netefatsa ho pheta-pheta ha boleng bo holimo, molamu o tlase oa mosi.Tungsten Carbide Grit e kopantsoe le motsoako oa Copper, Nickel le Zinc, ho hlahisa boleng ba boleng bo phahameng ba Composite Rod.