Hungsten Carbide Wattercher Planete
Tlhaloso
1. Re na le setoko se seholo bakeng sa lisebelisoa tse tloaelehileng tsa carbide mme li ka etsa nehelano nakong ea lihora tse 24.
2.
3. Mokhoa o itseng oa boholo o ka inshorense.
4. Mokhahlelo o matla o remang, ho bonolo ho khutlisa ba kenang le lilakane le litlele.
5. Ho bapala ka mokhoa o boreleli, ka mahlakore a mabeli kapa a 4 kapa a 4 kaofela, kaofela a sebetsa hantle haholo.
Litlhaloso
Mehato ea li-cartin tse halikiloeng:
| Keletso | Boholo ba lijo-thollo μm | Litaba tsa cobalt (WT.%) | Letsoalo g / cm3 | Ho thata HRA | TRS N / mm2 | Ts'ebeliso e khothalelitsoeng | Khoutu ea ISO |
| CR08 | Metsi a mahareng | 8% | 14.8 | 90.5 | 2400 | Ka tloaelo patsi ka patsi, lehong le thata | K20 |
| CR06 | Metsi a mahareng | 6% | 15 | 91 | 2300 | Ka patsi ka bongata | K20 |
| Uf16h | E hantle | 8% | 14.7 | 91.2 | 2500 | Lehong le thata | K20 |
| Uf18h | Submicron | 10% | 14.5 | 91.8 | 3200 | Lehong le thata | K30 |
| Uf07h | Submicron | 7% | 14.7 | 92.9 | 3000 | MDF, HDF | K30 |
Boholo
Lipontšo tse tloaelehileng tsa boholo bo le ka tlase:
| Hlahlobe | L (mm) | W (mm) | T (mm) | α |
| 7.5x12x1.5-φ4 | 7.5 | 12 | 1.5 | 30 ° / 35 ° |
| 8.6x12x11111.5-φ4 | 8.6 | 12 | 1.5 | 30 ° / 35 ° |
| 9.6x12x1.5-φ4 | 9.6 | 12 | 1.5 | 30 ° / 35 ° |
| 10.5x12x11.5-φ4 | 10.5 | 12 | 1.5 | 30 ° / 35 ° |
| 15x12x11.5-φ4 | 15 | 12 | 1.5 | 30 ° / 35 ° |
| 20x12x1.5-φ4 | 20 | 12 | 1.5 | 30 ° / 35 ° |
| 25x12x1111.5-φ4 | 25 | 12 | 1.5 | 30 ° / 35 ° |
| Hlahlobe | L (mm) | W (mm) | C (mm) | T (mm) | α |
| 25x12x1111.5-φ4 | 25 | 12 | 14 | 1.5 | 30 ° / 35 ° |
| 30x12x11.5-φ4 | 30 | 12 | 14 | 1.5 | 30 ° / 35 ° |
| 40x12x1.5-φ4 | 40 | 12 | 26 | 1.5 | 30 ° / 35 ° |
| 50x12x11.5-φ4 | 50 | 12 | 26 | 1.5 | 30 ° / 35 ° |
| 60x12x11.5-φ4 | 60 | 12 | 26 | 1.5 | 30 ° / 35 ° |
Ho na le mefuta e mengata e tloaelehileng ea litlolo tsa carbiside tse sa fetoheng, le tsona li amoheloa.
Linepe
Haeba u na le potso, u amohelehile ho ikopanya le rona nakong efe kapa efe!
Lisebelisoa tsa Production
Ho tsitsa
Spray o omileng
Tobetsa
PUP PUSELETSO
Semi-tobetsa
Sehloela se Sikulang
Lisebelisoa tsa ts'ebetso
Ho cheka
Terata e kuta
E otlolohileng slinding
Ho tsitsa bokahohleng
Ho thellisa sefofane
Mochini oa CNCA Carting
Sesebelisoa sa tlhahlobo
Boima mitha
Ramente
Tekanyo ea Karolo ea Quadation
Seletso ea makenete ea cobattic
Microscope ea tšepe
